This project is one of my all-time favorites: pipe shelves! With just a few supplies from your local home improvement store, you can have a chic open shelf project that adds just the right amount of industrial edge to any room in your home.
I've been wanting to build something out of an industrial pipe for the last few years, but I never really had a good reason to try my hand at pipe fitting (all the professional pipefitters in the world are glaring at me right now).
I've seen lots of great projects. End tables, curtain rods, paper towel holders. Even dog beds! However, I had a lightbulb moment when I wanted to give my bathroom a bit of a face left and needed some cute, yet inexpensive shelving. These wood and pipe shelves were just what I needed! Want to make your own DIY pipe shelves? It's simple - I'll walk you through the entire thing!
Table Of Contents
Pipe Shelves in the Bathroom
So I got busy in the bathroom last weekend building some new industrial pipe shelves. Because hey, if you're going to use plumbing pipe for a DIY project anywhere in your house, it might as well be in the bathroom. But, as you can see - it was a success!
A couple years ago when we renovated my son's bathroom and made it handicap accessible, we opted to use vintage gym baskets as "shelves". You can see more of that initial renovation on my Industrial Style Child's Bathroom post.
The problem was a gym basket, as fun as it looks, just doesn't have enough usable surface area to be used as a shelf.
There I said it. Gym baskets just don't work that well.
I can not tell you how many times I sat down on the potty, bumped the toilet lid and the razor fell over and hit me in the back. And since this doubles as a guest bathroom, you just can't be having razors cutting everyone's back all up. I can just imagine the conversations now:
Margie - "Why do you have a bunch of band-aids on your back, Susie?"
Susie - "Oh, I spent the night at Pam's house."
Margie - "Enough said."
So we decided to ditch the vintage gym basket look and go for a more traditional shelving idea. Well, as long as you consider industrial pipe and reclaimed lumber "traditional".
DIY Industrial Pipe Shelves Tutorial
These shelves have a serious cool factor, coupled with loads of practicality! I love when things can be both useful and stylilish. Even better This project is fairly affordable and simple to put together.
Pipe Shelf Supplies
To make these 3 shelves we used:
- 6 ¾" Floor Flanges
- 6 ¾" Caps
- 6 ¾" x 8" Nipples
- 1 ¼" x 8 - 3.18 cm Coarse Thread Drywall Screws
- 1 Board cut to the length you need (in our case we used reclaimed lumber that was roughly 2" wide x 6" deep x 5' long, cut in thirds - if you buy a new board from the hardware store, have them cut it to length for you)
- Black Spray Paint (I used less than 1 can of Rustoleum's Universal Hammered Paint & Primer In One in the black color)
- Measuring Tape
- Phillips head screwdriver, handheld or electric as you prefer
- Pencil
- Level
(A) Coarse Thread Drywall Screws / (B) Floor Flange / (C) Nipple / (D) Cap
Where To Buy Pipe Shelves Supplies
Home Depot
For buying in the store, this is what the plumbing pipe items look like on the shelf at Home Depot.
Don't forget, you can shop online at Home Depot and have the items all ready for you to pick up. This is amazing as it saves you from wandering down the aisles looking for this and that or waiting for your online order to arrive via UPS!
Amazon
On Amazon, you can also buy kits for building pipe shelves HERE. They are not put together for you (you still have to screw the pipes together), but it includes all the pieces to make 2 shelves (4 brackets), not including the wood. It would save you the time of picking out each individual component and it would be shipped to your home for you.
Or if you have quite a few shelves to make you can buy pre-painted versions in bulk quantities from Amazon also - floor flanges, nipples (pipe) and caps.
Instructions for Putting Together Your Shelves
- If you have shelves already in place, remove those shelves and patch any holes if necessary
- Wipe the grease and grime off your plumbing parts. I used soap and water for the floor flanges and the caps and since the nipples had tape wrapped around the price stickers, I used some Goo Gone on those. I think they are covered in "greasy stuff" so they don't rust while at the store, which reminds me, be careful when carrying them around the store while wearing a white shirt. Been there, done that, not doing it again.
- Next, screw one floor flange and one cap onto each nipple (ouch). These will be your brackets.
- Then, spray paint the brackets and allow them to thoroughly dry.
- Next, decide where you want shelves to be.
- If possible, try to align your flanges with wall studs. We were only able to do this on one side of the shelf, due to the size of the shelves, but still felt they were pretty darn sturdy. You may want to use dry wall anchors if you are unable to hit a stud with your placement of the brackets.
- It looks best to have at least 2 ½" - 3" between the outside of the bracket and the outside end of the board.
- Then, position your first bracket on the stud and screw into place.
- You can use a pencil to mark the floor flange holes onto the wall if you want to drill pilot holes first. I went straight into the drywall without pilot holes though. I'm wild like that.
- Next, hold your second bracket in place, put the board on top of the bracket and the level on top of that. Once the board is showing it is in a level position, screw the 2nd bracket into place.
- Finally, screw the remaining shelves into place the same way making sure they are spaced equal distances apart and all the brackets are placed vertically in line with each other.
Stand back and admire your handiwork!
Really these industrial pipe shelves are probably one of the easiest DIY projects out there. They give you so much bang for your buck!
How To Childproof Your Shelves
I did this project several years ago (it's held up GREAT, by the way!). But in that time, my number one asked question about this project is what to do if you want to attach the pipes to the boards.
Now in my case, the weight of the boards are enough to keep the wood in place. However, I don't have anyone in the house who would be pulling down on the shelves or trying to climb up onto them.
However, that isn't the case for everyone - and it's better safe than sorry when it comes to child safety! If you want to secure the wood to the pipes, you can attach pipe straps to the bottom of the wood. All you need to do is place a galvanized pipe strap around each pipe and screw them up into the wood shelves. Below are photos of what the part looks like on the shelf at Home Depot.
Have you taken the plunge and made anything fun out of plumbing pipe lately? (You know, there are really no good plumbing puns out there if I have to resort to a "plunge" reference!)
UPDATE: Love this look as much as I do? I've collected some other Industrial Pipe Projects for you from around the internet and listed them in my 10 Best DIY Industrial Pipe Projects. Along with the top Affordable & Creative DIY shelf Ideas.
Check out the web story version of this article HERE.
Stuart
Great shelves! I have built quite a few pipe projects. If you wish to find cheaper piping go to Supplyhouse.com
Mylissa Lynn
I love the shelves. It was a project I actually followed through and finished.
Maddison Walsh
I love these shelves - beautiful and practical. Lovely idea and you did a great job. Thanks for sharing this.
Laure Moluski
Hi Pam. This is the first time I have ever replied to a blog post, but I just had to because you are soooooo funny! I found myself laughing several times as I read this. It's also the most helpful DIY post I've seen. You definitely went above and beyond with all the links and in-store photos.
I love what you've done and have been thinking of trying something similar but was a bit intimidated. Will definitely be following!
Betty
Love this idea and your detailed instructions. I can't find any wood on Home Depot's site that is thicker than 1" though. Can you provide more info on how to find the wood?
Thanks!!
Pam
I'm so sorry, I just noticed your comment. The wood I used was reclaimed lumber that I bought at a small local store, but if you go to Home Depot they should have 2 x 6 x 8's in the framing wood. Here is a link to where I can see it on the site, but it may be different if you're in a different part of the country - http://www.homedepot.com/p/2-in-x-6-in-x-8-ft-2-and-Better-Kiln-Dried-Heat-Treated-Spruce-Pine-Fir-Lumber-161713/100037451. And it's going to be new and not weathered (although you could stain it). It does look like the "weathered barn wood" they have at Home Depot is only 1" thick though.
Justine
Hi how do you attach the wood to the piping so the shelves stay put
Pam
I just amended the tutorial to tell you how to do that and I said: "In my case, the weight of the boards are enough to keep the wood in place and I don't have anyone in the house who would be pulling down on the shelves or trying to climb up on them. But if you want to secure the wood to the pipes, you can attach pipe straps to the bottom of the wood, by placing a strap around each pipe and screwing them up into the wood shelves."
And then I showed photos of what the pipe straps look like on the hardware store shelf. You would probably want to paint them to match the shelves.
Jessica
Sadly, pipes and flanges have gone up so much in price lately. The flanges here are almost $9 each! We planned to make three shelves but it was going to cost $100 in pipes alone. ? We have some butcher block remaining from a kitchen reno and planned to use that for shelves. Oh well, back to the drawing board.
Justine M
The barn wood and pipes are very heavy. What did or would you use to anchor them into the drywall? Especailly if no studs line up with the space? What size anchor and type?
Karen
Fun and practical projects. I enjoyed your humor and the ideas!
Christy Kelly
Curious what this project cost total. Pipe materials can be pretty pricey. I like to know final cost before getting into a project.
Pam
They are not super inexpensive, no. If I remember correctly they were about $20 a shelf.
Melissa Pearson
These are Amazing.. I've pictured this in my head now for years, i'm so glad someone finally got it right.. Thank you!
Jessica
Love this project! Thank you for sharing it with us! Quick question though--how many screws do you use on each side? Is it only one per floor flange? Sorry if you mentioned it and I just missed it. :/
Thanks again!!
Pam
No problem, it's 4 screws per floor flange.
Jen
Where did you find the lumber for the shelves?
Christy Roppel
Hi!
I have a couple of quick question: I noticed that your boards aren't exactly flush with the ends of the pipes. Does this cause a problem? Also, I noticed you don't have the boards secured on the bottom. Is that necessary? I love your thick "boards". Did you custom cut them?
Thanks!
You did a wonderful job!
Tony
Very nice job! Keep it up 🙂
Geeta
Hi Pam,
These shelves are beautiful. It's gonna be my first DIY. I am so excited to start. Just couple of questions, where did you buy the reclaimed timber from? Will they cut it to the size you want? Thank you once again for such neat step by step post.
Pam
The wood I used was from a little local shop (they sell farmhouse decor and stuff like that and just happened to have some boards sitting there one day I stopped in). But Home Depot just started selling a similar looking wood which they call barn wood and they can cut to size for you right there in the store.
Carmen Martinez
Awesome and thank you for the safety tip! Lovely and easy and as soon as we move into our new home will be putting up these shelves, ~ Carmen
Katie
Do you glue down the wood to pipes or secure the wood in any way? Thinking of doing this in a kids room but would want to secure it...Any suggestions?
Pam
I did not, but you definitely should if children will be around them (which sounds odd since it's in my son's bathroom, but he's disabled and wouldn't be pulling on them so I skipped that step for us). I would put pipe clips on the underside screwing up into the shelves to keep them in place. You can paint them to match the pipes. You can buy them anywhere, but here's what they look like at Home Depot - http://bit.ly/PipeClamps .
John Carnaghie
You would only need two pipe clips per shelf. Before you paint the hardware, run the pipes, etc. through a dishwasher if you have one or five them a good hot water/detergent wash. This will remove any oil, etc. from the pipes and make the paint stick much better
Kyla
I did this in master bathroom!! We love it!!